Spectra Cure How to Use

1. Connect & Power On – Attach the DC adapter to the lamp and plug it into a power outlet to activate the device.
2. Select Timer Setting – Choose between 15s, 30s, 60s, or 90s low-heat mode using the digital control buttons.
3. Place Hand or Foot – Insert your hand or foot into the lamp; the built-in infrared sensor will automatically start curing.
4. Curing Process – Allow the selected timer to run fully; the dual-spectrum LED beads will cure evenly without overheating.
5. Finish & Remove – Once the timer completes, remove your hand or foot and admire the fully cured, glossy gel finish.