Swift Edge Drill Aftercare Tips

1. Clean After Each Use – Wipe the drill body with a soft, dry cloth. Disinfect drill bits separately after every session to maintain hygiene.
2. Avoid Harsh Liquids – Do not expose the handpiece or main unit to acetone, alcohol sprays, or water, as it may damage the motor and electronics.
3. Remove Bits Safely – Always unlock and remove the drill bit after use to avoid unnecessary tension on the chuck mechanism.
4. Charge Properly – Recharge using the original adapter only. Avoid overcharging or leaving the device plugged in overnight.
5. Store Securely – Keep in a clean, dry pouch or case to protect from dust, dirt, or accidental drops.
6. Keep Ventilation Clear – Ensure air vents are not blocked during or after use to prevent overheating.
7. Check Regularly – Inspect the power cord and motor for wear or unusual noise, and discontinue use if issues occur.
8. Avoid Overuse – Do not operate continuously for more than 30 minutes at maximum speed to extend motor life.