استمتع بشحن مجاني على الطلبات التي تزيد عن 200 درهم إماراتي تسوق الآن

AED
USA Flagالعربية
0

عربة التسوق

يغلق
سلة التسوق الخاصة بك فارغة حاليًا.
Nano® Spectra Cure UV LED Nail Lamp – 36/48W Professional Gel Curing Light with Dual Spectrum LEDs & Smart Timer

Nano® Spectra Cure UV LED Nail Lamp – 36/48W Professional Gel Curing Light with Dual Spectrum LEDs & Smart Timer

Professional Grade Dual-Spectrum LED

UV LED nail lamp designed for fast, even curing and professional gel application.

  • 48W high-performance curing
  • Dual-spectrum LED technology
  • Preset timer modes
  • Low-heat curing option

Dhs.420.00
الضريبة متضمنة. يتم احتساب الشحن عند الخروج.
Visa
أضف إلى قائمة الرغبات أضف إلى المقارنة اسأل عن المنتج

إملأ النموذج إذا كان لديك أي سؤال

hema free tpo free cruelty free vegan

This Nano® Spectra Cure UV LED Nail Lamp is designed to cure gel nail products quickly and evenly. Featuring dual-spectrum LED technology and adjustable timer settings, it delivers reliable, salon-quality curing for professional and advanced at-home use.

Dual-Spectrum LEDsEquipped with 14 dual-spectrum LED beads (365nm + 400nm) for fast and even curing of all UV and LED gels.
Smart Timer SettingsFeatures 15s, 30s, 60s, and 90s low-heat modes with a digital display for precise curing control.
Infrared SensorHands-free activation with intelligent sensor technology, automatically turning the lamp on and off.
Gentle Low-Heat ModeGradually increases power to reduce discomfort during curing, ensuring a smooth experience.
Compact & Sleek DesignModern, lightweight build with silent operation, perfect for both salons and home users.
Durable & PortableMade with high-quality materials, resistant to wear, and easy to carry for travel or professional kits.
  1. 1

    Connect & Power On – Attach the DC adapter to the lamp and plug it into a power outlet to activate the device.

  2. 2

    Select Timer Setting – Choose between 15s, 30s, 60s, or 90s low-heat mode using the digital control buttons.

  3. 3

    Place Hand or Foot – Insert your hand or foot into the lamp; the built-in infrared sensor will automatically start curing.

  4. 4

    Curing Process – Allow the selected timer to run fully; the dual-spectrum LED beads will cure evenly without overheating.

  5. 5

    Finish & Remove – Once the timer completes, remove your hand or foot and admire the fully cured, glossy gel finish.

Fast & Even Curing – Cures all UV and LED gel systems quickly and evenly with 14 dual-spectrum LED beads.
Low-Heat Comfort Mode – Prevents overheating and discomfort by gradually increasing power for a gentler cure.
Hands-Free Activation – Built-in infrared sensor allows automatic curing when the hand or foot is placed inside.
Suitable for All Uses – Works for both hands and feet, making it versatile for full salon or at-home nail care.
Portable & Lightweight – Compact, easy to carry, and perfectly designed for professional or personal use.
Avoid Direct Eye Exposure – Never look directly at the UV LED light while it is on, as it may cause eye discomfort or damage.
Do Not Submerge in Liquids – Keep the device away from water, acetone, or cleaning solutions to prevent electrical hazards.
Check Power Supply – Use only the provided DC adaptor; using an incorrect power source may damage the lamp or cause malfunction.
Do Not Cover Ventilation – Avoid blocking the lamp’s air vents to prevent overheating during extended use.
Keep Out of Reach of Children – The device should only be operated by adults and kept away from young children.
Avoid Overuse – Do not exceed recommended curing times or use continuously for more than 600 seconds per cycle.
Stop if Overheating Occurs – If the lamp becomes unusually hot or emits a burning smell, disconnect immediately and allow it to cool.
Medical Conditions – People with UV sensitivity or certain skin conditions should consult a doctor before using UV curing devices.
Wipe After Each Use – Use a dry, soft cloth to gently wipe the surface and LED area to remove dust or nail product residue.
Avoid Harsh Cleaners – Do not use acetone, alcohol sprays, or abrasive cleaning agents directly on the lamp, as they may damage the surface.
Keep Dry – Always ensure the lamp is kept away from water, gels, or other liquids to prevent electrical issues.
Check Power Adaptor – Regularly inspect the adaptor and cable; avoid using if there are exposed wires, burns, or cracks.
Store Safely – Keep the lamp in a cool, dry place away from direct sunlight, extreme heat, or humidity to preserve electronics.
Avoid Overuse – Do not run the lamp continuously for longer than 600 seconds per cycle to prevent overheating.
Protect LED Beads – Handle the lamp carefully to avoid scratching or damaging the LED lights.
Use Original Parts – Only use the provided adaptor and accessories to ensure proper voltage and safe curing.

التوصيل مجاني

Non-contact shipping

افضل سعر

Secure payments

0