C 2.3MM Under-Nail Clean how to

  1. Prepare the Nail – Ensure the nail is clean and dry before using the drill bit.
  2. Set the drill speed – Start at a lower speed that is 3000 RPM for better control, especially on sensitive areas.
  3. Hold the Drill Steady – Grip the drill firmly and position the two-way carbide bit under the edge of the nail. The two-way cut means the bit has cutting edges that allow for forward and backward movement.
  4. Use Gentle pressure – Let the drill bit do the work without pressing too hard to avoid injury or damage to the nail.
  5. Move in both directions – Since the bit has a two-way cut, you can move the drill in both forward and backward motions under the nail. This will help to clean out any debris, dirt, or product buildup effectively.
  6. Clean and Finish up – After use, clean the drill bit and the nail area to remove any debris.